Technical Visit — $95.35
Don't "FREEZE" — Call D's!
Book Now schedules your diagnostic visit. Non-refundable once booked.
Ruud UP19AY Endeavor® Line Ultra™ Series Heat Pump Installation Chicago
Ruud UP19AY Heat Pump Installation Chicago, IL
Ruud UP19AY
Up to 19 SEER2 / 10 HSPF2 · Variable Capacity
Sale Price
$5,900 – $9,500
Installed Price
$9,900 – $15,900
*Local taxes may apply. Financing available.
About the Ruud UP19AY Heat Pump
The Ruud UP19AY is the flagship heat pump in the Endeavor® Line Ultra™ Series, rated at up to 19 SEER2 for cooling and 10 HSPF2 for heating. It uses a variable capacity compressor that continuously modulates output to match the exact thermal demand of the home — delivering both cooling in summer and heating in winter from a single outdoor unit. For Chicago homeowners with electric heat or those looking to reduce dependence on natural gas, the UP19AY provides an efficient all-electric heating and cooling solution that performs reliably across a wide range of outdoor temperatures.
Variable capacity operation is the defining technology of the UP19AY. Rather than cycling fully on and fully off, the compressor modulates between minimum and maximum capacity — running at low output during mild weather and ramping up during Chicago's peak summer heat or cold winter days. This continuous operation removes humidity from the air far more effectively than single-stage equipment, maintains more consistent temperatures throughout the home, and operates more quietly. The UP19AY's 10 HSPF2 heating efficiency rating means it delivers significantly more heat energy per dollar of electricity than electric resistance heating.
The UP19AY is EcoNet® enabled, communicating with Ruud's smart thermostat platform for remote monitoring, self-diagnostics, and system optimization. It uses R-454B refrigerant, meeting current EPA and DOE environmental requirements. The copper-tube aluminum-fin coil is built for Chicago's climate — handling the thermal cycling between cold winters and hot, humid summers that accelerates corrosion in lower-quality coil materials. A factory-installed filter drier protects the refrigerant circuit from moisture and debris.
D's Air & Heating, Inc. installs the UP19AY throughout Chicago and the surrounding suburbs. Every installation begins with a free Manual J load calculation to ensure correct system sizing. D's Air pulls all required City of Chicago mechanical permits, handles inspections, and registers your Ruud 10-Year Limited Parts Warranty at installation. D's Air has been serving Chicago since 2009 under IL License #2183457. Call (773) 940-0965 to schedule your free in-home estimate.
Ruud UP19AY — Pricing by Capacity
Exact pricing for each available capacity size. Final price depends on site conditions, ductwork, and electrical requirements.
Capacity
Sale Price
Installed Price
2 Ton
Starting At $4,400
$7,400 – $9,900
2.5 Ton
Starting At $4,900
$7,900 – $10,900
3 Ton
Starting At $5,400
$8,400 – $11,900
3.5 Ton
Starting At $5,900
$8,900 – $12,900
4 Ton
Starting At $6,900
$9,900 – $14,400
5 Ton
Starting At $7,900
$10,900 – $15,900
*Local taxes may apply. Financing available. Prices subject to change without notice.
Ruud UP19AY Heat Pump Overview
The Ruud UP19AY is part of the Endeavor® Line Ultra™ Series within the Ruud Endeavor™ residential lineup. Rated at Up to 19 SEER2 / 10 HSPF2, this variable capacity heat pump is engineered for Chicago's demanding climate — delivering reliable performance through the city's extreme seasonal temperature swings, from sub-zero January nights to heat-index days that regularly exceed 100°F in July and August. The Endeavor® Line Ultra™ Series represents Ruud's commitment to combining factory-tested reliability with the efficiency ratings that Chicago homeowners need to manage utility costs year after year.
D's Air & Heating, Inc. installs the UP19AY throughout Chicago and the surrounding suburbs. Every installation begins with a Manual J load calculation to ensure the system is properly sized for your home — not oversized, not undersized. Proper sizing is the single most important factor in achieving the rated efficiency and comfort the UP19AY was designed to deliver. An oversized system short-cycles, leaving humidity high and temperatures uneven. An undersized system runs continuously without ever reaching setpoint on the most demanding days. D's Air sizes every system correctly the first time.
D's Air is a licensed Illinois HVAC contractor (IL License #2183457) serving Chicago since 2009. We pull all required mechanical permits, handle city inspections, and register your Ruud manufacturer warranty at installation. You don't need to do anything separately. Our technicians are trained on Ruud Endeavor™ equipment and follow manufacturer installation specifications on every job — including refrigerant charge verification, airflow balancing, and electrical connection inspection before the system is handed off to you.
Chicago's older housing stock — two-flats, bungalows, greystones, and vintage three-flats — presents unique installation challenges that require an experienced local contractor. D's Air has installed hundreds of systems across every Chicago neighborhood and suburb, and we understand the ductwork configurations, electrical panel limitations, and building permit requirements specific to this market. Whether your home has a high-velocity system, a standard forced-air setup, or an older duct configuration that needs modification, D's Air has the experience to handle it correctly.
When you choose the Ruud UP19AY through D's Air & Heating, you're getting a factory-tested Up to 19 SEER2 / 10 HSPF2 system installed by a licensed contractor who has been serving Chicago since 2009 — with transparent pricing, a written estimate before any work begins, and a 2-year workmanship warranty backed by D's Air on top of the Ruud manufacturer coverage. No contracts, no maintenance agreements required. Just a properly installed, properly sized, properly permitted heat pump that will perform reliably for years to come.
Why Chicago Homeowners Choose the Ruud UP19AY
Most Chicago homes still running HVAC equipment installed before 2015 are operating systems that fall well below the Up to 19 SEER2 / 10 HSPF2 efficiency of the UP19AY. The difference in operating cost is significant and compounds over a full Chicago heating and cooling season. Higher-efficiency equipment uses less energy per operating hour, and the savings are most pronounced during the peak demand periods — the coldest weeks of January and February, and the hottest weeks of July and August — when the system runs the most.
Beyond energy savings, the UP19AY's variable capacity operation delivers a level of comfort that older single-stage systems simply cannot match. Rather than cycling fully on and fully off, variable capacity systems modulate output to match the actual load of the home at any given moment. The result is more consistent temperatures throughout the day, better humidity control during Chicago's muggy summer weeks, and quieter operation that doesn't interrupt daily life every time the system cycles.
The Ruud UP19AY is also compatible with Ruud's EcoNet® smart home system, allowing homeowners to monitor and control their HVAC system remotely, receive maintenance alerts, and track energy usage over time. When paired with a compatible smart thermostat, the UP19AY can be programmed to optimize operation around peak utility rate hours, reducing operating costs without sacrificing comfort. D's Air can advise on thermostat compatibility and smart home integration options during your free in-home estimate.
Ruud UP19AY Features & Benefits
Up to 19 SEER2 / 10 HSPF2 — top efficiency in the Ruud heat pump lineup
Variable capacity compressor — modulates output to match exact demand
EcoNet Enabled — remote monitoring, self-diagnostics, smart thermostat integration
R-454B refrigerant — lower GWP, EPA and DOE compliant
2–5 ton capacity range — covers full Chicago residential range
Heating and cooling from a single outdoor unit
Factory-installed filter drier — protects refrigerant circuit
10-Year Limited Parts Warranty when registered
Copper-tube aluminum-fin coil — proven durability in Chicago climate
Quiet variable capacity operation
Technical Specifications
Installation Scope of Work
Scope of Work
- Free in-home Manual J load calculation to determine correct system size
- Removal and disposal of existing outdoor unit
- Installation of new Ruud heat pump on existing or new pad/brackets
- Refrigerant line set inspection — replacement quoted separately if required
- Electrical disconnect and wiring inspection — upgrades quoted separately if required
- Air handler or coil inspection — replacement quoted separately if required
- Refrigerant charge verification and system startup
- Thermostat verification and programming
- City of Chicago mechanical permit pulled and inspection scheduled
- Ruud 10-Year Parts Warranty registered at installation
- D's Air 2-Year Workmanship Warranty applied
- Post-installation system performance verification
Equipment & Materials
- Ruud Endeavor™ heat pump outdoor unit (model as specified)
- Refrigerant charge (R-454B)
- Disconnect box (if required)
- Electrical whip and wiring (if required)
- Pad or mounting hardware (if required)
- Filter drier (factory installed)
- Startup refrigerant charge
- City of Chicago mechanical permit
Labor Breakdown
- Manual J load calculation
- Existing unit removal and disposal
- New heat pump placement and leveling
- Refrigerant line set connection and pressure test
- Electrical connection and safety check
- System startup and refrigerant charge verification
- Thermostat programming and test
- City permit application and inspection coordination
- Warranty registration
- Post-installation walkthrough with homeowner
Warranty Coverage
Ruud Manufacturer Warranty
10-Year Limited Parts Warranty
Heat Exchanger Coverage Included
Registration Required at Installation
D's Air Registers at Install — No Action Needed
D's Air Workmanship Warranty
2-Year D's Air Workmanship Warranty
Startup Verification Included
Installation Quality Assurance
Warranty Registered at Installation
Why Choose a Ruud Heat Pump
Ruud Endeavor™ equipment is engineered for Chicago's climate — built to handle extreme cold, humid summers, and everything in between.
Energy Savings
High-efficiency ratings translate directly to lower monthly utility bills — especially important during Chicago's long heating and cooling seasons.
Enhanced Comfort
Variable-speed and multi-stage technology maintain consistent temperatures and humidity levels throughout your home, eliminating hot and cold spots.
Reliable Performance
Ruud Endeavor™ systems are built with heavy-gauge steel cabinets, factory-tested components, and proven technology for long-term dependability.
Quiet Operation
Sound-dampening design and variable-speed operation keep noise levels low — so you stay comfortable without the distraction of a loud system cycling on and off.
Our Installation Process
Every D's Air & Heating installation follows a structured process — from the first visit to final system handoff.
Home Evaluation
We perform a Manual J load calculation to determine the correct system size for your home — not a guess, not a rule of thumb.
System Selection
We walk you through the right Ruud model for your budget, efficiency goals, and comfort needs — with transparent pricing before any work begins.
Installation Day
Our licensed technicians remove the old equipment, install the new system, pull the required mechanical permit, and complete all city inspection requirements.
Final System Inspection
We perform a full startup verification, calibrate the system, register your Ruud manufacturer warranty, and walk you through operation before we leave.
Signs It's Time to Replace Your System
If your current system shows any of these warning signs, a new Ruud installation is likely more cost-effective than continued repairs.
Frequent Breakdowns
If you've called for repairs more than once in the past two years, repair costs are likely exceeding the value of keeping the old system running.
Increasing Energy Bills
Aging equipment loses efficiency over time. A spike in your utility bills — with no change in usage — is a clear sign the system is working harder than it should.
Age of Equipment
Most HVAC systems have a 15–20 year lifespan. Equipment approaching or past that range is operating on borrowed time and should be evaluated for replacement.
Uneven Heating or Cooling
Hot and cold spots throughout the home often indicate a system that is no longer properly sized, has failing components, or has ductwork issues that a new installation can address.
Why Homeowners Trust D's Air & Heating
Chicago homeowners have trusted D's Air & Heating since 2009 for honest pricing, quality installations, and service that stands behind the work.
Licensed and Insured
IL License #2183457. Every installation is performed by licensed technicians and covered by D's Air's general liability and workers' compensation insurance.
Factory-Trained Technicians
Our technicians are trained on Ruud Endeavor™ equipment and follow manufacturer installation specifications on every job — no shortcuts, no guesswork.
Upfront Pricing
We provide transparent pricing before any work begins. No surprise charges, no hidden fees. You know exactly what you're paying before we schedule installation.
Financing Options Available
Multiple financing programs available for qualified customers. Low monthly payments make a new high-efficiency system accessible without a large upfront cost.
Manufacturer Warranty Protection
We register your Ruud manufacturer warranty at installation — no paperwork for you. Combined with D's Air's 2-year workmanship warranty, your investment is protected.
Local Chicago HVAC Experts
We've served Chicago and the surrounding suburbs since 2009. We know the city's permit requirements, inspection process, and the unique demands of Chicago's climate.
Ruud Installation Costs in Chicago
Installation cost varies based on several factors. D's Air provides a detailed written estimate before any work begins — no surprises.
Factors Affecting Installation Cost
System size, equipment tier, ductwork condition, electrical requirements, gas line work, and permit fees all affect the final installed price.
System Efficiency Considerations
Higher-efficiency models carry a higher upfront cost but deliver lower monthly operating costs. The right efficiency tier depends on your usage patterns and budget.
Home Size Requirements
Proper system sizing requires a Manual J load calculation. An oversized or undersized system will underperform regardless of its efficiency rating.
Optional Comfort Upgrades
Smart thermostats, whole-home humidifiers, UV air purifiers, and zoning systems can be added at installation to maximize comfort and indoor air quality.
Maintenance Recommendations
Proper maintenance extends the life of your Ruud system and keeps it operating at peak efficiency. Follow these guidelines to protect your investment.
Seasonal Maintenance
Schedule a professional tune-up each spring before cooling season and each fall before heating season. Seasonal maintenance catches small issues before they become costly repairs.
Filter Replacement Guidelines
Replace standard 1-inch filters every 1–3 months. Thicker media filters (4–5 inch) typically last 6–12 months. A clogged filter restricts airflow and reduces system efficiency.
Professional Tune-Ups
Annual professional maintenance includes refrigerant level check, electrical connection inspection, coil cleaning, drain line flush, and full system performance verification.
Long-Term System Care
Keep the outdoor unit clear of debris, maintain 18–24 inches of clearance around the condenser, and address any unusual noises or performance changes promptly.
Frequently Asked Questions
What makes the UP19AY the top heat pump in the Ruud lineup?
The UP19AY reaches up to 19 SEER2 and 10 HSPF2 — the highest efficiency ratings in the Ruud residential heat pump lineup. Its variable capacity compressor modulates output continuously to match your home's exact demand, eliminating temperature swings and humidity spikes.
How does a heat pump work in Chicago winters?
Heat pumps extract heat from outdoor air and transfer it inside. Modern heat pumps like the UP19AY operate efficiently down to very low outdoor temperatures. For Chicago's coldest days, the system is typically paired with a gas furnace backup (dual-fuel system) or electric resistance backup to handle extreme cold.
How much does a Ruud UP19AY installation cost in Chicago?
Equipment sale price ranges from $5,900 to $9,500. Installed price ranges from $9,900 to $15,900. Final pricing depends on system size, ductwork, electrical requirements, and site conditions. D's Air provides a free in-home estimate.
Does D's Air register the Ruud warranty?
Yes. D's Air registers your Ruud 10-Year Limited Parts Warranty at installation. You do not need to register separately.
What areas does D's Air serve for Ruud heat pump installation?
D's Air & Heating, Inc. serves Chicago and surrounding suburbs including Oak Park, Berwyn, Cicero, Evanston, Skokie, and the greater Chicagoland area. Call (773) 940-0965 to confirm service availability at your address.
What refrigerant do Ruud Endeavor™ heat pumps use?
Ruud Endeavor™ heat pumps use R-454B, a lower-GWP refrigerant that meets current EPA and DOE requirements. D's Air technicians are certified to handle R-454B refrigerant.
Does D's Air pull permits for heat pump installations?
Yes. The City of Chicago requires a mechanical permit for heat pump replacement. D's Air pulls all required permits and handles city inspections on every installation.
Is financing available for Ruud heat pump installations?
Yes. D's Air offers multiple financing programs for qualified customers. Ask about current promotions during your free estimate.
Service Areas
D's Air & Heating installs Ruud equipment throughout Chicago and the surrounding suburbs.
Chicago
- All Chicago neighborhoods
- North Side
- Northwest Side
- West Side
- South Side
- Southwest Side
North Side
- Lincoln Park
- Lakeview
- Wicker Park
- Logan Square
- Bucktown
- Andersonville
Northwest Side
- Norwood Park
- Jefferson Park
- Portage Park
- Irving Park
- Avondale
- Belmont Cragin
West Side
- Austin
- Humboldt Park
- Garfield Park
- West Town
- Near West Side
- Pilsen
South Side
- Bridgeport
- Bronzeville
- Hyde Park
- Chatham
- Englewood
- South Shore
Nearby Suburbs
- Niles
- Skokie
- Morton Grove
- Park Ridge
- Rosemont
- Harwood Heights
- Norridge
- Des Plaines
- Lincolnwood
- Elmwood Park
- Evanston
- Oak Park
Authorized Ruud Dealer
D's Air & Heating, Inc. is a proud Authorized Ruud Dealer serving Chicago and surrounding communities. We provide professional Ruud furnace, air conditioner, heat pump, and complete HVAC system installation, replacement, repair, and maintenance services. As an Authorized Ruud Dealer, our technicians are trained to recommend, install, and service genuine Ruud equipment while helping homeowners maximize comfort, energy efficiency, and long-term reliability.
Ruud heating and cooling systems are recognized for their innovative technology, dependable performance, and energy-efficient operation. Whether you need a new Ruud furnace, central air conditioner, heat pump, or complete HVAC system replacement, D's Air & Heating, Inc. delivers expert installation, professional service, and trusted support. We help homeowners choose the right Ruud comfort solution while ensuring every system is installed according to manufacturer specifications and local code requirements.
Our experienced technicians are committed to providing quality workmanship, honest recommendations, and outstanding customer service backed by trusted Ruud manufacturer warranties. From routine maintenance and repairs to complete system replacements, D's Air & Heating, Inc. is your local source for professional Ruud HVAC services throughout Chicago and surrounding areas.
Why Choose Ruud HVAC Equipment?
- Innovative Technology — Ruud's Endeavor™ Line delivers advanced variable-speed and modulating systems for maximum comfort and efficiency.
- Energy Efficiency — Ruud systems meet or exceed federal efficiency standards, helping Chicago homeowners reduce monthly utility costs year-round.
- Dependable Reliability — Built for the demands of Chicago's cold winters and humid summers, Ruud equipment is engineered for long-term performance.
- Manufacturer Warranty — Ruud equipment is backed by a manufacturer limited warranty on parts and compressor when registered within the required window.
- Long-Term Value — Ruud's combination of efficiency, reliability, and warranty coverage delivers outstanding value over the life of the system.
Contact D's Air & Heating, Inc. today at (773) 940-0965 to schedule your free estimate for Ruud installation, replacement, maintenance, or repair services.
Authorized Ruud Dealer in Chicago
D's Air & Heating is a proud Authorized Ruud Dealer providing professional installation, replacement, repair, and maintenance services for the complete line of Ruud Endeavor™ heating and cooling products throughout Chicago and surrounding communities. As an Authorized Ruud Dealer, we install genuine Ruud equipment according to manufacturer specifications and industry best practices.
When you choose D's Air & Heating for your Ruud installation or replacement project, you receive expert guidance, professional workmanship, and access to one of America's most trusted HVAC brands. Our team helps homeowners maximize comfort, energy efficiency, and long-term system reliability through properly designed Ruud Endeavor™ comfort solutions.
Contact D's Air & Heating, your Authorized Ruud Dealer in Chicago, at (773) 940-0965 to schedule your free estimate for Ruud HVAC installation, replacement, maintenance, or repair.
Request Your Free Ruud UP19AY Estimate
D's Air & Heating, Inc. — Chicago's Ruud Endeavor™ Installation Specialist
Don't 'FREEZE' Call D's...Get a Free Installation Estimate
To provide accurate pricing and equipment recommendations, please complete the estimate request form below. Our team will review your information and contact you with options, pricing, and next steps.