D's Air & Heating, Inc.
Furnace tune-up technician inspecting heating system
Don't 'FREEZE' Call D's...
Only $133

Furnace Tune-Up Chicago

Get your furnace ready for winter before the cold hits Chicago.

4.6 stars · 200+ Chicago homeowners

A professional furnace tune-up is the best way to keep your heating system running safely, efficiently, and reliably throughout Chicago's long winter season. At D's Air & Heating, we provide full-service furnace tune-ups for all major brands, including Lennox, Carrier, Goodman, American Standard, and more. Chicago homes depend on strong, consistent heating, and routine maintenance helps prevent breakdowns, reduce energy costs, and extend the life of your furnace. Our technicians perform detailed inspections and manufacturer-approved procedures to ensure your system is ready for freezing temperatures.

During a tune-up, we clean burners, inspect the heat exchanger, test safety switches, check electrical components, verify airflow, calibrate the thermostat, and measure temperature rise. We also check the blower motor, inducer motor, ignition system, flame sensor, pressure switches, and venting to ensure everything is operating within safe limits. These steps help improve efficiency, reduce noise, and catch small issues before they become expensive furnace repairs. Whether your furnace is new or over 20 years old, annual maintenance keeps it performing at its best. For Lennox equipment, our technicians follow Lennox-approved service procedures to protect your warranty.

We also offer performance optimization, including deep cleaning, static pressure testing, airflow balancing, and system adjustments that help your furnace run smoother and quieter. With proper tune-ups from D's Air & Heating, your furnace will deliver dependable heat, improved comfort, and lower utility bills all winter long. For urgent heating issues, we also offer emergency heating service. Contact us to schedule your tune-up today.

Why Chicago Homeowners Tune Up Their Furnace Every Fall

A furnace tune-up before winter can mean the difference between a warm home and an emergency call at 2 AM. Our 18-point furnace tune-up covers safety, efficiency, and reliability — no contracts required.

Furnace Tune-Up Pricing

Upfront pricing — no surprises, no contracts.

Furnace Tune-Up

$133

18-point inspection, cleaning, safety check, and efficiency calibration.

Full System Tune-Up

$149

Furnace + AC both inspected and tuned in one visit. Best value for year-round comfort.

Why Tune Up Your Furnace?

A $95.35 tune-up can prevent a $600 breakdown on the coldest night of the year.

Lower Heating Bills

A clean, tuned furnace uses less gas and runs more efficiently — saving you money all winter.

Carbon Monoxide Safety

We inspect the heat exchanger for cracks that can leak dangerous CO into your home.

Prevent Winter Breakdowns

Catch worn parts before they fail on the coldest night of the year.

Extend Equipment Life

Annual maintenance adds years to your furnace and protects your investment.

Warranty Protection

Most furnace manufacturers require annual maintenance to keep warranties valid.

Same-Day Scheduling

We offer flexible appointments including evenings and weekends across Chicago.

Our 18-Point Furnace Tune-Up Checklist

Every item inspected, cleaned, and verified on every visit.

Inspect heat exchanger for cracks or damage
Clean and inspect burners
Test igniter and flame sensor
Inspect and clean blower motor and wheel
Lubricate all moving parts
Test and inspect gas valve operation
Check and tighten all electrical connections
Test limit switch and safety controls
Inspect flue and venting for blockages
Measure temperature rise across heat exchanger
Test thermostat calibration and operation
Inspect and replace air filter if needed
Check static pressure in ductwork
Test carbon monoxide levels at supply registers
Inspect draft inducer motor
Test system start-up and shutdown cycle
Check gas pressure at manifold
Provide written report with findings

Furnace Tune-Up FAQs

When should I schedule a furnace tune-up?

Fall is ideal — before you need heat. We recommend September or October so you're ready before Chicago winters hit.

How long does a furnace tune-up take?

Typically 60–90 minutes. You'll receive a written report of everything we inspect and find.

What if you find something wrong?

We'll show you exactly what we found and give you a flat-rate repair price before touching anything. No pressure, no surprises.

Do you service all furnace brands?

Yes — Lennox, Carrier, Trane, Rheem, Goodman, York, Bryant, and more. Any brand, any age.

Is the $133 price all-inclusive?

Yes. The $133 covers the full 18-point tune-up. Any repairs needed are quoted separately at flat rates before work begins.

Book Your Furnace Tune-Up Today

Only $133 — No contracts. No surprises. Stay warm all winter.

Chicago Heating & Cooling Done Right.  ·  Don't ‘FREEZE’ Call D's...

Why Chicago Homeowners Trust D's Air & Heating

Licensed & Insured

IL License #2183457

Serving Chicago

Since 2009

Authorized Dealer

Multiple Brands

No Contracts

Ever — Guaranteed

Permit Pulled

Every Installation

Professional Standards

Code-Compliant Work

EPA Certified

Mainstream Engineering

R-410A Certified

Mainstream Engineering

Why Choose D's Air & Heating, Inc.?

Chicago's trusted HVAC company since 2009 — licensed, insured, and committed to honest workmanship on every job.

Experience Since 2009

D's Air & Heating has served Chicago homeowners and businesses since 2009. Over 15 years of local HVAC experience means we've seen every type of system, every Chicago building configuration, and every challenge the city's climate presents.

Manufacturer-Trained Technicians

Our technicians receive ongoing manufacturer training and certification. We install Lennox, Goodman, Amana, Daikin, Sinclair, Weil-McLain, Peerless, and other leading brands — and we know each system inside and out.

Licensed, Insured & Permitted

D's Air & Heating holds Illinois HVAC License #2183457 and carries full liability insurance. We pull City of Chicago permits on every installation — protecting you legally and ensuring the work meets code.

Honest Recommendations

We tell you what you need — not what generates the highest invoice. If your system can be repaired cost-effectively, we'll say so. If replacement makes more sense, we'll explain exactly why. No pressure, no upselling.

Local Chicago Expertise

We know Chicago's housing stock — two-flats, greystones, bungalows, vintage buildings with steam heat, modern construction with forced air. We size and install equipment for the specific demands of Chicago homes and Chicago winters.

Long-Term Customer Support

Our relationship doesn't end at installation. We register your equipment for warranty, remain available for follow-up questions, and provide ongoing maintenance to keep your system running at peak efficiency for years.

What Chicago Homeowners Should Know About Furnace Replacement

How a Gas Furnace Works

A gas furnace draws in return air, heats it through a heat exchanger using a gas burner, and distributes the warm air through your ductwork. Modern high-efficiency furnaces (90%+ AFUE) use a secondary heat exchanger to extract additional heat from combustion gases, dramatically reducing energy waste compared to older 80% AFUE units.

Warning Signs Your Furnace Needs Replacement

Age over 15–20 years, rising energy bills, uneven heating room to room, frequent cycling on and off, yellow or flickering burner flame, unusual noises (banging, rattling, squealing), and carbon monoxide detector alerts are all signals that replacement may be more cost-effective than continued repairs.

Choosing the Right Efficiency Level

For Chicago's cold winters, a 96%+ AFUE two-stage or variable-speed furnace delivers the best long-term value. Two-stage operation runs at lower capacity most of the time, reducing temperature swings and improving humidity control. Variable-speed blowers further improve comfort and air filtration efficiency.

Proper Sizing and Load Calculations

An oversized furnace short-cycles — it heats quickly, shuts off, and repeats — causing temperature swings, excess humidity, and premature wear. An undersized unit runs constantly and still can't keep up on the coldest days. D's Air performs Manual J load calculations on every installation to ensure the right equipment size for your home.

Airflow, Static Pressure, and Ductwork

Even the best furnace underperforms in a poorly designed duct system. D's Air measures static pressure and airflow on every installation. If your ductwork is undersized or leaking, we identify it before installation — not after — so your new furnace delivers the comfort it was designed for.

What to Expect From Your D's Air Furnace Installation

1

Free Estimate

We assess your home, measure your space, review your ductwork, and provide a written quote with no pressure.

2

Equipment Selection

We recommend the right brand, efficiency level, and size for your home and budget — not the most expensive option.

3

Installation Day

Our crew arrives on time, protects your floors and work area, removes the old equipment, and installs the new system cleanly.

4

Startup & Testing

We run full combustion analysis, check gas pressure, measure airflow, and verify safe operation before we leave.

5

Customer Training

We walk you through your new thermostat, filter location, and maintenance schedule before we pack up.

6

Warranty Support

We register your equipment for the full manufacturer warranty and remain available for any follow-up questions.

D's Air Installation Standards — Every Furnace Job

  • Manual J load calculation before equipment selection
  • Static pressure and airflow measurement — duct system verified
  • Proper flue venting per manufacturer specs and local code
  • Gas line pressure test and leak check at all connections
  • Combustion air verification — adequate supply to burner
  • Carbon monoxide test at all registers after startup
  • Thermostat calibration and system test in both heat and fan modes
  • City of Chicago permit pulled on every installation
  • Equipment registered for full manufacturer warranty
  • Customer walkthrough of new system operation and filter schedule

What Our Customers Say

4.6 / 5.0

Based on Google Reviews — D's Air & Heating, Inc.

M

Marcus T.

Furnace Replacement

"D's Air & Heating did an outstanding job replacing my furnace. Darryl was professional, on time, and explained everything clearly. The installation was clean and the system works perfectly. Highly recommend."

Verified Google Review
S

Sandra M.

Lennox Installation

"D's Air has been our go-to HVAC company for years. They installed our Lennox furnace and have maintained it ever since. Honest, reliable, and they never try to upsell you on things you don't need."

Verified Google Review
K

Kevin B.

HVAC Installation

"Professional from start to finish. They pulled the permit, did the installation correctly, and registered the equipment for warranty. That attention to detail is why I keep calling D's Air."

Verified Google Review
D

Denise H.

Furnace Repair

"Great experience overall. The technician was knowledgeable and took the time to walk me through the new system. Pricing was transparent with no hidden fees. Would definitely use again."

Verified Google Review

Ready to Work With Chicago's Trusted HVAC Company?

D's Air & Heating, Inc. — Serving Chicago Since 2009. Licensed, Insured, No Contracts.

📅 Book Online📞 Don't Freeze — Call D's!🚨 Need Help ASAP?Same-Day HVAC Service Available